- With UV Inhibitors
- Thermal Laminating Film
- Wide Format
- 195-205 Melt Temperature
DigiKote is a thermal laminating film with UV inhibitors for wide format imaging. Specifically engineered for wide format output, this low-melt film was designed to accommodate a wide variety of inks. It can be used for inkjet, electrostatic, laser or thermal transfer technologies. Printed images are protected from harmful UV rays and remain bold and colorful up to five times longer than uncoated images. All films listed melt at approximately 195°F to 205°F at 3-6 feet/minute. Faster or slower speeds require higher or lower temperatures respectively.
Digikote Satin provides a low-glare, fingerprint resistant finish that provides superior protection for your laminated prints. This film is very popular for tradeshow graphics, point of purchase displays, and menus. This film also works well when die cutting. 5 mil Digikote Satin is a 2/3 construction (2 mil polyester base and 3 mil polyethylene adhesive).
Also available in 3 mil Priced per roll.
| 5 MIL DIGIKOTE | GLOSS | ||||
|---|---|---|---|---|---|
|
FILM GAUGE |
ROLL WIDTH |
ROLL LENGTH |
CORE SIZE |
PRICE | |
| 5 mil | 25" | 250' | 3" | 174.32 | |
| 27" | 250' | 3" | 188.62 | ||
| 38" | 250' | 3" | 264.96 | ||
| 40" | 250' | 3" | 278.90 | ||
| 43" | 250' | 3" | 299.82 | ||
| 51" | 250' | 3" | 355.60 | ||
| 55" | 250' | 3" | 383.50 | ||
| 60" | 250' | 3" | 417.23 | ||
