Ledco combined the features and benefits of the well-known Econocraft pressure-sensitive roll applicator with the XL44 pouch mounter/laminator. The resulting hot roll Signmaster conveniently and easily automates the use of transfer tape, pressure-sensitive laminates, thermal and pressure sensitive mounting boards, mounting boards with overlaminates, and thermal pouches. If you are serious about the sign business, this tool is a must for your shop.

Designed for Sign and Graphics Applications, Signmaster laminators are used in many settings including sign shops, photo-finishing labs, reprographics shops, and manufacturing plants. Using a Signmaster is much easier than doing the same work by hand. Fast and versatile, it takes little instruction to be up and running. The Signmaster is forgiving and will apply most materials under a wide range of speed and tension settings.

Minimize waste and labor. In today's competitive world, the cost of re-work (recutting, re-weeding, or re-application) can take all of the profit out of the job. Whether it is transfer tape, vinyl, acid-resistant tape, pre-mask, adhesive film, or other pressure-sensitive materials, a Signmaster will put it down effortlessly with no bubbles or wrinkling, minimizing any waste of materials and labor.

The Signmaster is a heavy-duty, commercial laminator designed for the most rigorous and demanding jobs and workloads. It is designed to provide quality lamination with a wide variety of papers, vinyls and other materials up to 1/2" thick using film up to 10 mils thick.

Features:

• Release liner take-up with an adjustable clutch, takes up the release liner found on most pressure-sensitive films.
• Roller bearings, alloy construction and high quality motors insure a long and trouble-free life.
• Variable speed motor control allows operators to apply different materials to different substrates. A preset 3-function switch allows operation in variable speed modes.
• Feed tray is non-ferrous, so magnetic materials may be applied.
• Supply roll tension knobs are important, because without some supply roll tension, most films and tapes will wrinkle during application.
• Reverse drive switch makes it simple to back material out of the laminating rollers or correct a material wrap-around.
• Foot pedal is a standard feature that frees hands to align and feed work.
• Stand, casters and bottom supply roll are included.
• Safety shield with electronic interlock prevents operation of the machine if the guard and the feed tray are not in place, protecting operators and other employees.
• Two independently operated safety stop buttons are conveniently located on either side of the machine that will automatically stop the laminator when depressed by the operator.
• Correct lamination pressure is ensured by rubber rolls that are spring-loaded and preset. The pressure is easy to adjust if required when performing routine maintenance.

Applications Include:

• Apply transfer tape
• Apply vinyl to sign blanks
• Mount or mount and laminate in one easy step
• Apply all pressure-sensitive materials
• Protect inkjet and other prints produced on a wide variety of printers
• Made in the U.S.A. - best quality and ready availability of parts
• Ledco 2-year parts and labor warranty (excludes normal wear and tear and abuse).