         
1-800-869-2827
|
BanTAC™ Films |
| BanTAC™ Pro Pressure-Sensitive (Cold) Laminates:
BanTAC laminating films were engineered for those demanding jobs that require exceptional clarity. These films offer a permanent solvent pressure-sensitive adhesive for high bond and no image silvering. A UV absorber in the adhesive increases fade resistance. Available in:
- Gloss, matte, satin, and lustre 3 mil thick, flexible PVC.
- Crystal textured velvet-matte, flexible and scratch resistant, 4 or 10 mil thick.
- Exhibit 5 mil and 15 mil Polycarbonate, ultra scratch resistant
|
| BanTAC Cold Mounting Adhesive:
Promount 2 mil white polypropylene general purpose mounting adhesive. Acrylic adhesive w/single kraft liner.
|
| BanTAC Pro Backing Films:
Proback White 10 mil rigid PVC white opaque backing film w/permanent acrylic adhesive.
|
|
BanTAC CROSS REFERENCE MATRIX
|
BanTAC™ Pro Pressure-Sensitive Films:
Minimum order is $150.
|
BanTAC™ Mounting Adhesive:
Minimum order is $150.
|
FILM
DESCRIPTION |
ROLL
WIDTH |
ROLL
LENGTH |
CORE
SIZE |
PRICE
|
ORDER |
Promount White
PROMOUNT White is a general purpose mounting adhesive with a 2 mil white polypropylene carrier film, a permanent adhesive on both sides, and a single release liner. The white polypropylene film offers very good hiding properties when mounting to colored substrates and it is suitable for all general purpose mounting applications. The 55 pound Kraft liner and acrylic adhesive system makes the film easy to manage and provides a permanent bond which will not yellow over time. |
25.5" |
150' |
3" |
106.12 |
|
| 38" |
150' |
3" |
165.10 |
|
| 43" |
150' |
3" |
178.97 |
|
| 51" |
150' |
3" |
215.98 |
|
| 60.5" |
150' |
3" |
273.54 |
|
Custom roll widths are available. Price is next wider stock width plus $12.00 slit charge.
Allow 2-3 days extra lead time for custom widths.
|
Stripmount Removable
STRIPMOUNT Removable is a unique pattern-coated removable adhesive without a carrier film on a single Kraft liner. STRIPMOUNT is easily hand applied to printed in 4" strips so it does not require a laminator. It is not necessary to apply STRIPMOUNT to the entire graphic. Instead, simply apply STRIPMOUNT by hand around the edges and then every 8 to 12 inches across the remaining surface area. To install, remove liner and hand apply to window or other non-porous surfaces. Suitable for indoor display applications of up to 3 months. |
10" |
164' |
N/A |
52.46 |
|
|
See our BanTAC CROSS REFERENCE MATRIX for assistance with your film selection.
|
Exhibit graphics recommendations:
- Inkjet prints should be allowed to completely dry prior to lamination. Depending on media type, ink density and humidity levels, drying can take 4 to 24 hours.
- After lamination the graphics should be allowed to set flat for 24-48 hours to ensure full adhesive cure prior to rolling.
- Rolled graphics should always be wound print side out.
- The diameter of a rolled graphic should be no smaller than 12".
|
 |
|
|
Order online, send us email, or call 1-800-869-2827. 
|
|
© 1999-2008 Netc.Netc.
Last Updated 08-Jul-09
|
|
