Econocraft features include:
- A scrap rewind with an adjustable clutch takes up the release liner found on many pressure-sensitive films.
- Roller bearings, alloy construction and high quality motors insure a long and trouble-free life for these machines.
- The laminating roller opening is adjustable in seconds and allows operators to work with different thickness materials.
- A variable speed motor control allows operators to apply different materials to different substrates.
- Interchangeable rubber rollers help keep maintenance costs down.
- The supply roll tension knobs are important, because without some supply roll tension, most films and tapes will wrinkle during application.
- A reverse drive switch makes it simple to back material out of the laminating rollers or correct material wrap-around.
- Manufactured in the U.S.A. means quality, better service and faster parts availability.
- A foot pedal is now a standard feature that frees hands to align and feed work.
- A stand is included.
- A safety shield with electronic interlock prevents operation of the machine if the guard and the feed tray are not in place, protecting operators and employers.
- Exit tray
Options:
- Slitter attachment cuts material on the supply roll for application to narrower substrates, for multiple-up production or for striping.
- Bottom supply roll assembly provides for roll-fed application of materials, such as transfer tape to weeded vinyl or transfer taped vinyl to banner material.
|
Reduce labor costs. Jobs such as applying vinyl to sign blanks or putting transfer tape on vinyl signage are very labor intensive. As the material gets wider and longer, the labor costs become disproportionately high. Bubbles and wrinkles are introduced, and waste increases. Some jobs require the additional time and mess of liquid application.When signage is ruined during the taping or application process, the cost of recutting, reweeding, and reapplying will usually take all the profit out of a job. Whether it's transfer tape, vinyl, sandblast or acid resist tape, premask, adhesive film, clear polyester, or other pressure-sensitive material, an Econocraft will put it down effortlessly with no bubbles or wrinkles.
Save time/improve quality. Using an Econocraft is much easier than doing the same work by hand. Fast and versatile, it requires little instruction for you to be up and running. Supply roll tension is controlled with knobs. The laminating roller gap is adjusted with a single knob. Econocraft applicators are forgiving. They will apply most materials under a wide range of speeds and pressure or tension settings.
The Econocraft is a heavy-duty commercial laminator designed for the most rigorous and demanding jobs and workloads.
|
Econocraft Laminators and Options:
|
| PRODUCT |
PRICE |
|---|
| EP-44 Laminator w/Heavy-Duty Stand and Casters (110V) |
6,995.00 |
| EP-44 Laminator w/Heavy-Duty Stand and Casters (220V) |
7,350.00 |
| EP-60 Laminator w/Heavy-Duty Stand and Casters (110V) |
7,245.00 |
| EP-60 Laminator w/Heavy-Duty Stand and Casters (220V) |
7,295.00 |
| Bottom Supply Roll for EP-44 |
430.00 |
| Bottom Supply Roll for EP-60 |
557.00 |
| Slitter (Pre-feed) 44" |
389.00 |
| Slitter (Pre-feed) 60" |
499.00 |
| Mandatory Crating Charge (60" only) |
500.00 |
| One Day Training |
1,400.00
plus travel expenses |
|
