Ledco HD-25
Laminator

Ledco HD-25

25" Industrial Series
"Workhorse" Laminator

These are the kinds of terms Ledco owners use to describe their Heavy Duty 25's. There are Ledco "Workhorses" 20 years and older that are still going strong. There are owners with several machines that have produced for years with no maintenance other than oiling, adjusting, and replacing "normal wear" parts.

Appreciative owners say a Ledco HD-25 absorbs tremendous usage with amazing durability, produces high-quality lamination, and easily handles a wider range of jobs than any other 25" laminator.

It is an ideal machine for the owners of smaller inkjet printers and other digital imaging devices, because it will mount or mount and laminate in a single pass on boards up to 1/2" thick. It will handle different materials without setup changes, run polypropylene film, laminate one-sided, and do cold lamination with the addition of a release liner takeup.

Who can use a Workhouse? Any graphics or finishing shop that needs a true commercial machine... trade laminators, big color imaging shops, photo finishers, printers, government or school support centers, binders & finishers, military installations, hospitals, reprographers, map makers, publishers, and manufacturers.

Features that contribute to making a machine people naturally call a Workhorse:

• Intelligent heat controllers display both the set temperature and the actual temperature. The microprocessor in the control quickly learns to anticipate the heat demand of each job and keeps the actual temperature within a few degrees of the set temperature.
• Laminating and pull rollers are covered with quality silicone rubber for superior release quality, higher lamination quality and easier cleaning. The laminating rollers and pull rollers are interchangeable.
• Removable heat shoes are teflon coated to reduce film abrasion. They are easily unplugged and removed to clean or replace the laminating rollers.
• Built-in retractable slitters save an enormous amount of cutting time by trimming away side scrap during the lamination process. The two heads can be adjusted independently with great precision.
• Upper fan assembly. When running thicker films, additional cooling capacity permits work to be run at a higher speed.
• Dual tension knobs (clutches) for each supply roll mandrel are easy to use and provide as little or as much tension as needed to keep work wrinkle-free.
• Forced air cooling is essential when running thicker films, because the lamination needs to be cooled to get good results.
• Easy access controls are conveniently located and grouped for effective operation.
• A safety guard is built into the feed tray to help insure it will always be in place when laminating.
• Both upper and lower rollers are driven to minimize the wrinkling or curling that can occur when only one roller is driven.
• Standard precision feed tray has both left and right side guides.
• Stand. Built of heavy duty tubular steel. Designed to place unit at optimum feeding height, and to provide a secure base.
• Made in the U.S.A.

• Release Liner Takeup. Removes liner material from pressure sensitive and dry resist films.
• Footage counter. For accurate measurement of film usage.
• Additional slitter heads. For multiple-up work.

BACK TO TOP