         
|
Mounting Boards
and Large Pouches |
Mounting Boards
Available in six convenient sizes, these boards are used for mounting with a pouch laminator, such as the XL44 or XL27 and the EXP 42, or a hot roll laminator, such as the Ledco Professor, Signmaster, Digital 44 Hot Roll; Banner American's Entry 4500; or D&K's Expression 42 Plus. The boards are pre-laminated on the back to minimize bowing when a graphic is mounted to the front. The fronts of the boards are coated with heat-activated adhesive.
To use, select the board closest in size to the graphic to be mounted. Center the graphic on the adhesive (dull) side of the board. Cover the whole top of the board (graphic and all) with a piece of release paper (two are included in the box with the boards). The release sheet protects the rollers of the laminator from exposure to adhesive not covered by the graphic.
NOTE: Starter kits are available for the XL44 and XL27 laminators.
Mounting Boards
Minimum order for products on this page: $150.00
|
| DESCRIPTION |
SIZE |
UNITS/BOX |
PRICE |
ORDER |
| White Mounting Board | 9" x 12" | 10 | 18.29 | |
| 12" x 18" | 10 | 32.17 |
|
| 19" x 25" | 10 | 44.16 | |
| 25" x 37" | 10 | 86.21 | |
| 37" x 49" | 10 | 188.86 | |
| 43" x 61" | 10 | 250.89 | |
| Gloss Mounting Board | 9" x 12" | 10 | 31.36 |
|
| 12" x 18" | 10 | 54.02 | |
| 19" x 25" | 10 | 98.15 | |
| 25" x 37" | 10 | 155.56 | |
| 37" x 49" | 10 | 264.42 | |
| 43" x 61" | 10 | 378.25 | |
| Satin Mounting Board | 9" x 12" | 10 | 33.08 |
|
| 12" x 18" | 10 | 57.17 | |
| 19" x 25" | 10 | 105.27 | |
| 25" x 37" | 10 | 167.64 | |
| 37" x 49" | 10 | 284.30 | |
| 43" x 61" | 10 | 405.39 | |
| Crystal Mounting Board | 9" x 12" | 10 | 53.20 |
|
| 12" x 18" | 10 | 75.67 | |
| 19" x 25" | 10 | 117.14 | |
| 25" x 37" | 10 | 201.87 | |
| 37" x 49" | 10 | 384.09 | |
| 43" x 61" | 10 | 545.12 | |
|
Large Laminating Pouches
Available in five sizes and two finishes, these oversize pouches are convenient for laminating individual graphics using a pouch laminator such as the XL44 or XL27, or a hot roll laminator, such as the Ledco Professor.
To use, select a pouch closest in size to the graphic to be laminated. If encapsulating the graphic, be sure the pouch is enough larger than the graphic to leave an even border all the way around. It is necessary to use a sled (carrier board) to process a pouch through the laminating rollers. Select the appropriate size sled and pouch. Lay the pouch on the top of the sled. Open the pouch. Center the graphic and close the pouch. Place the closed end of the pouch under the hold-down strap. Insert the sled into the laminating rollers hold-down strap end first.
NOTE: Starter kits are available for the XL44 and XL27 laminators.
Large Laminating Pouches and Other Products
Minimum order for products on this page: $150.00
|
| DESCRIPTION |
SIZE |
UNITS/BOX |
PRICE |
ORDER |
Glossy Laminating Pouch
7 mil | 9" x 12" | 25 | 40.54 |
|
| 12" x 18" | 25 | 70.36 | |
| 19" x 25" | 25 | 147.68 | |
| 25" x 37" | 25 | 229.39 | |
| 37" x 49" | 25 | 387.65 | |
Satin Laminating Pouch
7 mil | 9" x 12" | 25 | 55.43 |
|
| 12" x 18" | 25 | 96.76 | |
| 19" x 25" | 25 | 205.64 | |
| 25" x 37" | 25 | 321.95 | |
| 37" x 49" | 25 | 542.72 | |
| White Sleds | 20" x 27"
(Use with 9x12, 12x18, & 19x25 Pouches) | 2 | 35.01 |
|
27" x 40"
(Use with 25x37 Pouches) | 2 | 47.74 |
|
40" x 52"
(Use with 37x49 Pouches) | 2 | 83.81 |
|
| Release Sheets | 21" x 30" | 10 | 22.28 |
|
| 27" x 40" | 10 | 24.96 | |
| 40" x 52" | 10 | 33.87 | |
| "Cool-Clean" Roll Cleaner | 16 Oz. Cleaner, Scotch Brite Pad, Cloth | 1 | 25.75 |
|
|
 |
|
|
Order online, send us email, or call 1-800-869-2827. 
|
|
© 1999-2006 Netc.Netc.
Last Updated 26-Mar-08
|
|
